CURZATE FUNGICIDE (CYMOXANIL 8% + MANCOZED 64% WP)

MODE OF APPLICATION: Initial applications should start when local conditions indicate that late blight is imminent; make additional applications at 5–7 day intervals, however at least 20 days must pass between the 2nd and 3rd application.

• If disease conditions are present during this 20 day period, a fungicide other than Curzate must be used to protect the crop during this period.
• Apply no more than 4 applications per crop.
• May be applied by air. Apply by air with a minimum water volume of 50 L/ha. Do not handle more than 50 kg of Curzate 60 DF fungicide per day for aerial applications.
• Maximum for ground application is 38kg.
• The disease early blight is controlled by the registered tank-mix with a Group M fungicide.

NOTE: Ensure the spraying equipment is clean. Fill spray tank 1/4 to 1/3 full with clean water and engage agitation. Prepare mixture volume to apply a minimum of 200 litres spray volume per hectare.

• With the agitator running, add the required amount of Curzate 60 DF Fungicide to the spray tank. Then add the required amount of Manzate® DF fungicide or Manzate® Pro-Stick™ fungicide to the spray tank while maintaining the spray solution agitation.
• Continue to agitate until Curzate 60 DF fungicide and Manzate® DF fungicide or Manzate® Pro-Stick™ fungicide are completely dispersed.
• Completely fill the remainder of the spray tank with water.
• On repeat tank loads, draw down the tank contents to less than 10% of the original volume, and repeat from step 1. If more than 10% of the spray volume remains, pre-slurry the Curzate 60 DF fungicide and Manzate® DF fungicide or Manzate® ProStick™ fungicide in a bucket of water before adding to the spray tank.